Double Glazing Lock Repair
Double-glazed windows are popular among homeowners who want to improve the energy efficiency and security of their home. They are susceptible to being damaged or deteriorated over time.
Fortunately, many issues with double glazing can be solved without having to replace the window unit. Stiff handles and locks as well as windows that are sagging or misting are usually resolved by lubricating the mechanisms or tightening screws.
Worn or damaged locks
When a lock is damaged or worn, it can be quite dangerous and leave you vulnerable to break-ins. This could be due to general wear and tear, or damage caused by burglars. However, replacing or repairing locks is easy if you are aware of what to look for.
Double-glazed window handles may be difficult to open. This is usually due to a faulty locking mechanism that can cause the handle jam when trying to close it or to open. Find a double-glazing lock and handle specialist in your area to repair the handles.
Another issue that is common to window locks made of uPVC is that they can be misaligned, which can prevent the door from locking properly. This can be due to a variety of reasons, including inadequate installation or the weathering. In some instances, this can be corrected by simply taking off the weather stripping, and moving it back, but in other situations you may need to replace the cylinder or alter the strike gap on the inside of the door frame.
It is essential to choose a double-glazing repair service with qualified technicians. This will ensure the job is done properly. Check out reviews from customers to find out what other customers have said about their services. Check to see if the business is insured and comes with written warranties to ensure that you are assured about their work.
If you have trouble locking your uPVC window, you can apply a silicon spray on the lock. This will help to loosen the bolts that are stuck and allow them to be able to connect with keyholes. It's also recommended to oil the lock frequently, so it doesn't become stiff and unresponsive after a while.
A faulty lock can also be an indication that it has been picked or damaged and you should replace your locks as soon as possible. It is important to change locks if you've recently moved into the home. double glazing repair near me may still have copies of your keys from the beginning.
Locks that are difficult to open
The most common issue double-glazing owners mentioned in our survey was the windows and doors becoming hard to open or close. In most instances, these issues can be solved without replacing the entire window or door. In some cases you can try lubricating the hinges handles and mechanisms can solve these problems. If this doesn't work, it might be worth having a locksmith take a closer look to determine what the root of the issue is.
Often, a lock becomes difficult to open due to the fact that it has become hard or sticky. This could be due dirt, heat, or the wrong key. A professional will be able determine if this is indeed the case and can repair the lock, usually without having to replace it.
Powdered graphite is a great option to lubricate a lock. It is available in small tubes at many home improvement stores and automotive shops. To use it, simply squirt a little in the keyhole and insert the key several times to spread the graphite. You could also use the lead from an ordinary pencil, but make sure that it is made from genuine graphite and not wood shavings. Graphite will help to lubricate the lock and make it easier to open.
The cylinders might not be aligned correctly, which can cause the locks to be stiff or sticky. This is often the case when the door has been hit repeatedly and can be solved by re-aligning locks. The door may also be difficult to open if the hinges are loose. If this is the case, the door hinges must be tightened.
Another common cause of the door being locked is that the key has been snapped in the lock. This can be a serious security risk since it takes only 30 minutes for an intruder cut off a typical euro barrel cylinder. It can be difficult to take a broken part of the lock. However, with perseverance and the use of a flathead or needle nose screwdriver, it's possible.
Locks that aren't functioning properly
Windows that won't close properly are more than just a problem; they allow in draughts, compromise home security and also increase your energy bills. Burglars frequently wiggle through the windows to gain entry into your home, so having secure locks are a great method of keeping them out. It is important to repair any window locks that are not functioning properly as soon as you can, to prevent them from becoming a bigger issue.
There are a variety of reasons your uPVC window might not be locking properly. The bolts could have become incorrectly aligned. This could be the result of repeated slamming or swelling and contracting during hot and cold weather, or just through general wear and tears. This can prevent the bolts from getting into the locking position. They won't lock properly if you close the handle.
A defective locking system may also be the cause. If you have an Saracen Lock on your window, this could be the case. They are typically found on uPVC windows with aluminium frames. They are renowned for their distinctive flat strip design and as they rotate, they work in tandem with the security of multi-point locks placed around the frame to close the window. They also come with a high security upgrade to offer extra security against forced entry.
If you're having issues with your uPVC double-glazed window the best thing you can do is get in touch with a dependable and experienced professional. They'll be able to inspect your window and determine the cause of the issue. This will save you money over the long term by eliminating the need to replace a complete window unit.
In addition, they are able to often spot the problem quicker than you think. They can identify the window model via phone, and then find a replacement at a reasonable cost. They can then fit the part onto your uPVC window without having to replace the entire mechanism.
Replacement
If you're in the market for a new lock for your uPVC or double-glazed windows or doors, Owen the Locksmith can offer a wide range of options to meet your requirements. This includes both single point locks and multipoint locking systems as well as various handles and a wide range of hinges and striker plates. Our team can also modify your uPVC or double glazing mechanisms so that they operate in a different manner to fit your needs and the way you use your doors and windows.
The most frequent issue with uPVC windows and doors is that they'll lose their ability to properly close, which can lead to water damage and draughts in your home. This is typically a sign that the gaskets have shrunk and are unable to hold the gasses that insulate between the glass panes. If you suspect that this is the case, call the company who installed your double-glazed windows and ask them for a replacement of the gasket seals.
This is a much cheaper alternative than replacing your entire window unit. It also helps you save money by keeping more warmth in your home. If you decide to replace your window seals, be sure to get the seals from a trusted manufacturer.
One of the most common issues with uPVC windows and doors is that they become difficult to open. This is usually due to stiff hinges or a damaged system. You may try DIY solutions like cooling down the hinge or applying lubrication to the mechanism. However, if this doesn't work, you may need to call an expert.
A majority of people install high-quality anti-burglar devices on the front door and gates, but they often overlook windows. A faulty lock could compromise your home's security. A broken lock could let unwanted guests into your home, which makes it important to get the issue resolved as soon as you can. There are glaziers that can fix your uPVC window issues including damaged handles and defective locking mechanisms. They can fix this without compromising the look of your home.